Condition: excellent (used), Year of construction: 2004, Digital display, Heidenhain Max. turning diameter over bed: 570 mm Turning length: 1500 mm Max. spindle speed: 2,240 rpm Multifix size C 3-jaw chuck, diameter 250 mm Nlsdpfj Aa D Dbjx Abueh Fixed steady rest, diameter 20 – 315 mm Tailstock

Condition: used, Year of construction: 1991, turning length: 530 mm, turning diameter: 340 mm, spindle bore: 78 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 3,500 rpm, overall weight: 6,000 kg, CNC MF T4, 3-axis machine with C-axis 12-position motorized tool turret Nsdpfx Abjznvizsuelh 250mm chuck 78mm spindle bore Maximum spindle speed: 3500 rpm, power: 15 kW Distance between centers: 625mm Maximum turning diameter: 625mm Chip conveyor Weight: 6000 kg

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Nodpfx Aezvrrhobujlh Specifications: Swing: 1,000 mm Centers: 8,000 mm

Condition: used, Year of construction: 1998, turning diameter 385 mm max. turning diameter 620 mm Nlsdpfx Ajz Icuuebush turning length 958 mm control MSD 501 II Mori Seiki greates pass round over bed 710 mm Swing dia. over traverse guideway 738 mm centre distance 1.125 mm turning speed range - main spindle 10 - 1.600 min/-1 power capacity - main spindel 30 / 22 kW spindle bearing diameter 180 mm spindle bore 130 mm spindle nose JIS A2-11 x-axis 345 (310+35) mm z-axis 995 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 60 mm turret change time 0,4 sec. tailstock adjustment 850 mm dia. of quill 110 mm taper of center MK 5 quill stroke 150 mm rapid traverse X: 20 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 64 kVA weight of the machine ca. 11,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Lathe MORI SEIKI - SL 400 B / 800 - 11x Turning tool holders

Condition: used, Year of construction: 2006, machine/vehicle number: 76005007 06 0006, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 5,250 kg, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used inclined-bed lathe, manufactured in 2006. The manufacturer is Trens in Trenčín (Slovakia), where the machine is known as the SBL 500 CNC. The 12-station turret has 6 driven stations, allowing for drilling and milling operations to be performed in a single setup. It is controlled by a Siemens Sinumerik 810D. The machine is located in the Düsseldorf area and was running during our inspection. TECHNICAL DATA - Year of manufacture: 2006 (according to the nameplate) - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm Nsdoz H Udxspfx Abuolh - Distance between centers: 550 mm - Turret: 12-station, with 6 driven stations - Main drive: 22 kW, max. 4,200 rpm - Machine weight: 5,250 kg (nameplate) EQUIPMENT AND ACCESSORIES - Chip conveyor Tsubaki with cable carrier (SRF 040) - Tool holders, equipped - Turning and clamping tools - Setup tools CONDITION The machine was running during our inspection on October 1, 2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for shafts, flanges, and housing parts up to 400 mm in diameter, where transverse drilling or surface machining is to be carried out at the same time. LOCATION AND PROCESSING The machine is located in the Düsseldorf area. Inspections can be arranged by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact information for forwarding companies in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES Njdpfxez H Ugyo Abuslh - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: used, Year of construction: 2003, functionality: unexamined, center height: 300 mm, center width: 1,500 mm, turning length: 1,500 mm, The Löw W570 is a used, conventional lead and follower rest lathe, manufactured in 2003. With a center height of 300 mm and a turning length of 1,500 mm, it is a robust workshop machine for individual parts and repairs. It is equipped with a Givi Misure ME 620 digital display, and the operating manual is available. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2003 - Center height: 300 mm - Turning length: 1,500 mm - Digital display: Givi Misure ME 620 EQUIPMENT AND ACCESSORIES - Three-jaw chuck (as shown in the photos) - Tool holder on the top slide (as shown in the photos) - Tailstock - Tool set - Operating manual for Löw W 490/570 series CONDITION Nledpsz H Uhqofx Abuoh During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For maintenance, training, prototype construction, and job shop turning, i.e., anywhere where individual parts are turned manually. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 820 mm, overall weight: 6,000 kg, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details. - Chuck: 12" (3-jaw chuck)- Max Turning Diameter: 430 mm- Swing Over Bed: 978 mm- Turning Length: 713 mm- Phase: 3 Phase- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 133 A- Current Rating of Spindle Motor: 300 A- Short Circuit Current: 1 kA (220 V Maximum)- Rated Power: 46 kVA- Machine Dimensions: 3,400 mm x 2,089 mm x 2,270 mm- Optional Accessories/Equipment: Tooling, chip conveyor, accessories/manuals available Nledpfx Abszwxzxouoh Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2016, turning diameter 220 mm turning length 200 mm Nsdog Sx D Iepfx Abuolh control Siemens Sinumerik

Condition: new, Center distance ----- 1000 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDED Nodpfx Abok Iug Tsuelh * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2, with 4 attachments * Self-centering 3-jaw chuck, 250 mm * Independent 4-jaw chuck, 320 mm * Faceplate, 350 mm * Steady rest and follow rest * LED work light and cooling system * Electric brake (CE) * Foot brake * Toolbox with various tools

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Turning diameter ----- 360 mm Passage of main spindle ----- 38 mm Bed width ----- 203 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 KW Weight ----- 880 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops Njdpfeq E Iyzox Abujlh * 3 chuck 200 mm * 4 chuck 200 mm * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE)

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Nlodpfx Abot Ei Husush Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. Njdjzl D Rujpfx Abuslh The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: used, 5 sets of soft top jaws, fixed jaws, RÖHM type: Duro 160/3 Suitable for 3-jaw chucks with a wedge-type shank Nedpfoz Rnb Tox Abuelh Chuck diameter: 160 / 180 mm Identification No.: 94008 Jaw length: 86 mm Jaw width: 20 mm Overall height without bridge: 36 mm Overall height with bridge: 41 mm Groove width: 8 mm Bridge width: 18 mm Hole spacing: 32 mm Bore size: Ø 9 mm (for M8 screws) - 5 sets of steel top jaws - Used jaw sets, varying degrees of wear Dimensions of base jaw L x W x H: approx. 86 x 20 x 41 mm Weight: approx. 5.5 kg Several sets of top jaws available Top jaws suitable for RÖHM, FORKARDT, SCHUNK, or SMW

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Njdpfx Aboz Rxg Hsuelh Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,672 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, overall weight: 4,200 kg, total width: 1,550 mm, total height: 2,160 mm, bar diameter (max.): 26 mm, product length (max.): 2,350 mm, number of axes: 8, This 8-axis Maier ML26 C5Y were manufactured in 2019. It features a spindle capacity of 26 mm and a rapid carriage speed of 32 m/min. The machine includes a robust coolant capacity of 260 l and is equipped with a bar feeder and extensive tooling package. Three machines available! If you are looking to get high-quality turning capabilities, consider the Maier ML26 C5Y swiss type turning machine we have for sale. Contact us for further details. - Carriage / Rapid Speed: 32 m/min - Main Spindle Capacity: 26 mm - Main Spindle Indexing: Mechanical indexing 5° - Main Spindle Headstock Stroke: 320 mm (Options: 220 mm, 450 mm) - Main Spindle Power Rating (100% / 60%): 5.5 kW / 7.5 kW - Main Spindle Collet: 161E - Counter Spindle Capacity: 26 mm - Counter Spindle Indexing: Mechanical indexing 5° - Counter Spindle Max. Travel (Z2): 220 mm (340 mm option) - Counter Spindle Speed: 0 - 8000 rpm - Counter Spindle Power Rating (100% / 60%): 5.5 kW / 7.5 kW - Counter Spindle Collet: 161E - Guide Bush Model: 451.001 - Coolant Capacity: 260 l / 1.5 bar - Cross Machining Lathe Tool Holders: 5 pcs. (12x12) - Driven Tools: 4 pcs. - Back Machining Tools: 4 pcs. Ø34mm (driven) - Back Machining Y2 (Option): 4 pcs. Ø34mm (fixed), 4 pcs. Ø34mm (driven) - Front Machining Tools: 5 pcs. (fixed) - Power On Time: 31,849 h 23 min - Cutting Time: 13519 h - Part Total Count: 1,052,178 pcs - Accessories: Bar feeder / loading magazine (FMB), oil mist extractor (LTA), 2 x live tools, extensive tooling package included - Total Power: 17.3 kW - Voltage: 400 / 230 / 24 V Nledpsz R A Uuefx Abush Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm Nedpfx Aju Ix E Hebujlh centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 Nledou Ix Hdopfx Abuoh tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) Nljdpju Ix Hqefx Abueh i.D. *

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW Nedsu Ix I Uopfx Abuolh dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock Nljdpju Ix N Sjfx Abuoh i.D. *

Condition: used, Technical details: turning diameter over bed: 230 mm turning diameter over support: 135 mm centre distance: 2000 mm spindle bore: 60 mm tailstock quill taper MT: MK 5 tailstock quill adjustment:: 300 mm total power requirement: 5,5 kW weight of the machine ca.: 2,5 t dimension machine approx.LxWxH: 3,7 x 1,20 x 1,30 m • 4 change gears installed • No taper turning attachment • 3-jaw chuck: Ø 350 mm • 4-jaw chuck: Ø 315 mm • Coolant system available Nodszvnq Tspfx Abuelh *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 665 mm turning dia. over face-slide: 530 mm turning length: 750 mm max. turning diameter: 395 mm longitudinal traverse (z-axis): 500 mm facing movement (x-axis): 600 mm control: TX8H spindle passage: 80 mm revolution per minute: 60 -12.000 U/min tool turret - number of stations: 24+1 operating hours - idle run: 26466 h operating pressure: 6 bar diameter of quill: 85 mm quill stroke: 140 mm tool taper: ISO 40 total power requirement: 36 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 4,8 x 3,5 x 2,8 m The TRAUB TNA 400 is a high-performance CNC turning machine designed for the precise complete machining of turned parts. Equipped with the proven TRAUB TX8H control system, the machine is suitable for both single-part and series production. It features a hydraulic chuck, tailstock, and a fully enclosed working area with a coolant system. Its robust design ensures high precision and reliable process stability in continuous industrial operation. Equipment: ·TX8H CNC control ·Swivel table Nlsdpfxoz Ndq Te Abuoh ·Central lubrication system ·Coolant system ·Spindle cooling ·Spindle air blow function ·Working area lighting ·Chip flushing nozzles ·Electronic handwheel ·Leveling elements ·Signal tower light ·Manual wash gun ·Macro programming ·NAVI-MILL workshop programming ·Programming cycles ·Program runtime calculation ·Parts counter ·Intelligent handwheel ·Tool magazine with 24 + 1 tool positions *

Condition: used, Year of construction: 1976, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 800 mm turning length: plan =140 / quer =120 mm center height over bed: 170 mm spindle bore of work spindle: Ø 40 mm range of revolution per miute: 25 - 2000 / 20 step U/min Nljdova Ertopfx Abush feeds:: längs: 0,028 - 1,0 / quer: 0,012 - 0,44 mm tailstock quill taper MT: MK3 tailstock quill adjustment:: 120 mm total power requirement: 3,0 kW weight of the machine ca.: 1,1 t dimension machine xH: 2,0 x 0,8 x 1,4 m Threading possible: Metric, Withwort and modular thread Equipment: - 2-way measuring device VISUCONT - 3-jaw chuck Ø 205mm with internal clamping jaws - quick-change steel holder Multifix - foot brake - cooling water pump (exclusive supply) *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Nedpfxsvbhv Ro Abuslh Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *