Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Codpfxjzdrzxs Aphegw Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz Cgjdpfxjzgufre Aphew EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Cgodszgt U Sspfx Aphew Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Axes: X, Z MACHINE DETAILS Csdpfx Aozgt Urephogw Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 81 mm, turning diameter: 99 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 240 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning length: 81.3 mm Maximum turning diameter: 99.1 mm X-axis: 300 mm Z-axis: 240 mm Spindle head: A2-6 Spindle bore: 33 mm Speed (variable): 4,000 rpm Spindle motor power: 11 kW Number of tools on the turret: 8 Number of driven tools: 10 MACHINE DETAILS Control: Fanuc 21iT Dimensions & Weight Machine dimensions (including chip conveyor): 290 x 235 cm Cjdpfx Aezfg E Iophsgw Machine weight: 4,000 kg Dimensions of transformer station: 65 x 60 cm Weight of transformer station: 150 kg Overall dimensions (L x W x H): 2,600 x 2,300 x 2,400 mm Total weight: 3,900 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, The machine has only been in operation for approximately one year! MACHINE DETAILS Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg FEATURES CNC control with operator panel Cgsdpfx Apozf I Scjhjw Tool turret Tailstock Spindle chuck Enclosed working area Long-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for its accuracy: TECHNICAL DETAILS Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Number of tools: 10 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: G1115-0025, turning length: 2,100 mm, turning diameter: 610 mm, spindle speed (max.): 1,500 rpm, bar diameter (max.): 165 mm, controller model: Fanuc i Serie, The machine is new and has no operating hours! TECHNICAL DETAILS Turning length: 2,100 mm Maximum turning diameter: 610 mm Y-axis travel: 150 mm Spindle Speed: 1,500 rpm Maximum bar diameter: 165 mm Torque: 2,990/2,459 Nm Spindle nose: A1-15 Spindle bore: 21" 2-speed geared spindle Tool turret Tool positions: 12 x BMT 75 Cedpfxozdztds Aphegw Speed of driven tools: 4,000 rpm Axes and tailstock Tailstock: MT #6 Tailstock stroke: 120 mm C-axis available MACHINE DETAILS Control model: Fanuc i series Power: 45/37 kW EQUIPMENT C-axis Steady rest optional

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Codpfezf H Ezsx Aphogw Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Codpfxjzfiipe Aphogw Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Codpfxjv I Ddqs Aphegw Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Cedoq N Ay Aepfx Aphjgw Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Csdsrfx Tnopfx Aphjgw Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Codpowmlckefx Aphogw Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Cgodpfonr Nl Ssx Aphjw Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Cedpfx Asy Drunophjgw Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: used, YOM 2013 Cgjdey Dtuispfx Aphow Chuck Size – 150mm Bar Capacity – 53mm Swing – 430mm Spindle Speed - 4,000 RPM Control - Siemens 802D Distance Between Centers – 1000mm X-Axis Travel – 220mm Z-Axis Travel – 1065mm Swing Over Cross Slide – 200mm Motor – 10 HP 4-Way Tool Post Tailstock Over Dimensions (Approx.) 2.75m x 1.3m Weight (Est.) 2800kgs

Condition: used, Fanuc 21i - TB Control, Rated Capacity, 30kVA, Largest Load 15kVA, Weight 4500kgs Technical characteristics of CNC Daewoo Puma CT250 lathe Reference: Distance between centers: 650 mm Max swing over bed: 570 mm Max swing over slide: 420 mm Spindle hole diameter: 77 mm X-axis travel: 250 mm Z-axis travel: 680 mm Speed: 3500 rpm Approx machine weight: 4240 kgs Year: 2003 Equipped with: Cjdpjzg Ep Uefx Aphogw Control: FANUC 21T 3-jaw chuck: Ø 250 mm Turret: 10 stations Chip conveyor: Yes

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Cgedpfxozhn Txo Aphow We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), chuck outer diameter: 1,050 mm, turning diameter: 1,050 mm, rotational speed (max.): 117 rpm, Model: 36 EM Table Dia: 42” (Oversized) Max Swing: 42” Cgedpfx Aszggfdophjw Table Speeds: To 117 RPM

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Cgedpfxjzh Ndxj Aphew Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: excellent (used), Webster Bennett 48" Elevating Rail Vertical Turning Lathe With Copying attachment Csdszh Ndrepfx Aphegw 48" diameter table Can be shown demonstrating at our premises if you wish to view.

Condition: excellent (used), Webster & Bennett 72" Elevating Rail Vertical Turning Lathe with copying attachment 72" diameter table Cgodezh Ndfopfx Aphjw Can be shown demonstrating at our premises if required.

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Cgedjzhaqvepfx Aphow Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: good (used), Year of construction: 2014, Mazatrol Matrix 2 Control, Cgsdpozibazofx Aphew Table Size 500 X 400mm, Table Load 300 Kgs, Traverses X Y Z; 350 X 550 X 510mm, Min-Max Distance Spindle to Table 50 -560mm, C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 12,000 Rpm, 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant,

Condition: as good as new (ex-display), Year of construction: 2024, New and unused, 340mm turning diameter, 570mm turning length, Y axis +/- 41mm, 400mm swing, 65mm bar capacity, spindle speed 4,500rpm, 15 station turret, 11/15kW spindle motor, Cgodpfjziavhox Aphsw milling 6000rpm, C axis 0.001 degrees, FANUC-i control, tailstock, coolant, tool setter, swarf conveyor, parts catcher, 3 jaw chuck, tooling,