Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 Lsdpfjx Dmi Dex Ah Uoak YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: good (used), Year of construction: 2013, Distance between Centres 1250mm, Swing 470mm, swing over cross-slide 257mm, Lsdpfx Asx Dk Svjh Ujak Spindle Speed 2500rpm, 80mm spindle bore, Prototrak SLX control, Quick change toolpost, manual 3 jaw chuck, Coolant, interlocked guards

Condition: used, Year of construction: 2012, Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 76 Position ATC, Spindle Taper Capto C6 at 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm (2012) Lajdpfex Hxk Ujx Ah Ujk Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2007, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rp9023 Supplied with: Laodpex H Anwjfx Ah Uek Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, operating hours: 2,015 h, travel distance X-axis: 265 mm, travel distance Z-axis: 1,305 mm, Mazatrol Smart Travels X/Z 265/1305 mm C-axis 0.001° Lsdpfx Ahex Nin Ns Usak Swing ø 720 mm Swing over cross slide ø 423 mm Max machining length 1274 mm Max machining ø 420 mm Rapids X/Z 30/33 m/min Tailstock body travel 1265 mm Tailstock taper MT #5 Chuck size 10" Spindle speeds ~ 4000 rpm Spindle power 26 kW Milling spindle speeds ~ 4000 rpm 12 station tool turret Bar capacity 77 mm Coolant Interlocked guards Low Volt Light Magazine Barfeed Parts Catcher Swarf Conveyor Tool setter

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Lsdpexw Ilmefx Ah Uoak Swarf conveyour Renishaw Toolsetter

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Max. drive power - 5.3 kW Quill diameter 50 mm Lajdpfx Asxyzikjh Ujk Inner cone MT3 Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: good (used), Year of construction: 2008, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 52mm bar capacity, 12 station VDI30 turret, 14.7kW Spindle Motor, Lsdpfxox Dk Azo Ah Usak Spindle Speed 5000rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Barfeed.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Ljdpfxoxwy S Ee Ah Uoak Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ Laedsx I A Hcopfx Ah Ujk • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Lajdpfx Asx E T Npoh Usk Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, Machine Name - Colchester Lsdeuk H Rbspfx Ah Usak Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: good (used), Year of construction: 2007, turning diameter over cross slide: 370 mm, spindle bore: 104 mm, turning length: 2,000 mm, turning diameter: 554 mm, center width: 2,000 mm, turning diameter over bed slide: 554 mm, swing diameter over cross slide: 370 mm, turning diameter over top slide: 554 mm, spindle speed (max.): 2,000 rpm, total length: 4,100 mm, total width: 2,000 mm, total height: 1,750 mm, overall weight: 3,600 kg, rotational speed (max.): 2,000 rpm, Equipment: rotational speed infinitely variable, Centre distance: 2.000 mm Swing: 554 mm over bed / 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2.000 rpm 3-jaw Chuck: Schunk Ø 350 mm Camlock Controller: GE Fanuc Lodpfx Aex Id Dcsh Ujak Featured with: - 1x Fixed steady Ø 245 mm (without base plate) - 1x Fixed steady Ø 390 mm (without base plate) - 18 Parat toolpost holders - Various jaws for chuck - Centre points - Cooling unit - Machine Manuals Country of origin: UK Motor power: 7,5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 593mm maximum cutting length, 50mm Bar capacity, Lasdpfx Asx Dk Aheh Ujk 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: good (used), Year of construction: 2004, turning length: 2,000 mm, Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Lajdoxvyq Espfx Ah Uok Air Filer Mist

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Ledpfxjx Imlco Ah Ueak Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Lodpfx Ahox E Ugvj Uoak Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2023, Distance between Centres 1000mm, Swing 360mm, Swing over cross-slide 225mm, Spindle Speed 50-4000rpm, 52mm spindle bore, Prototrak RLX control, toolpost, 3 jaw chuck, Coolant, interlocked guards Ledjxz Dqgjpfx Ah Usak

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Lsdpfx Ahjx E Ubms Usak Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, Lasdpfeq T Rt Dex Ah Usk milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor (2011) Lajdpfjx E Tzrsx Ah Ujk Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, Lajdeu Rb Snopfx Ah Ujk spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, Lajdpswnfzcjfx Ah Ujk 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, Lsdpfowq Inqex Ah Uoak swing over carriage 400mm, 65mm bar capacity , machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, parts catcher, tool setter, tailstock

Condition: excellent (used), Year of construction: 2019, 460mm swing over bed, 270mm swing over cross slide, 1500mm Distance between Centres, 2200rpm spindle, Laodpfx Ahsw Naxqs Uok 77mm Spindle Bore, 11kW spindle motor, FANUC OI-TD CNC control, Tailstock, 300mm 3 jaw chuck, coolant, 8 station turret, coolant