Condition: ready for operation (used), chuck outer diameter: 1,200 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Bjdpfx Aexqh R Neacslp Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Application Types Turning Bjdpjxr Rx Eefx Aacelp

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety Blsdexugdijpfx Aacsp chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm Blodpfx Aoxrlfgoacep -Weight: 1.4 kg

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: WEILER, Model: COMMODOR Blodpfoxt Ngqox Aacsp Year: 1979 Technical Data Make: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63–2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • 3-jaw chuck • Multifix tool holder All information without guarantee. A demonstration under power can be arranged at any time in our showroom.

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 784, Machine Name - CMZ Machine Model - TL25 Y.O.M 2006 Blodov A Ey Ajpfx Aacep S.N 784 Description - Control Fanuc 31i Chuck size 250mm Swing 400mm 76mm spindle bore Max.turning diameter 676mm 12 Station turret Live tooling Sub spindle Swarf conveyor Tool setting probe Gantry loader Manuals

Condition: ready for operation (used), chuck outer diameter: 1,600 mm, controller model: E.C.S CNC 2600, Mario Carnaghi TG10/1600 - Ø 1700 mm CNC Max turningdia -- passage: 1700 mm Power on the spindle: 36.7 kW Max longitudinal travel X-axis: 1965 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 3.5 - 300 rpm TOOLING: yes Turret: yes Qty Tools: 12 Bodpfxexqh R Ao Aacslp Coolant pump: yes Light: yes

Condition: new, Year of construction: 2025, 0583 mm 1710 mm Bledpfx Ajwp Tqnoacsp 82 mm 436 mm 3000 U/min A1-8 DIN 55026 100 mm 235 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle Blsdsxuf Tcopfx Aacop with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg Bledpsxrk T Njfx Aacep

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Bljdoxrf Stspfx Aacjp Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed Bledpfx Aaewxl Rlscop

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm maximaal gewicht op tafel: 300 ton rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 tpm Vaste externe kolom: ramafmetingen: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel maximale hoogte van uitwendig draaien/frezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slag: 8000 mm horizontale slag: 2030 mm Beweegbare binnenkolom: RAM-formaat: 280 x 280 mm max. diameter van inwendig draaien/frezen: 5180 mm min. diameter van inwendig draaien/frezen: 3048 mm max. hoogte van inwendig draaien/frezen: 5800 mm min. hoogte van inwendig draaien/frezen: 615 mm verticale slag: 5800 mm horizontale slag: 1120 mm Blsdpfxsxqh Ste Aacjp Spiltoerentallen: 1,2 601 tpm Totaal vermogen: 250 kW 5-assige CNC-besturing

Condition: used, Year of construction: 2003, functionality: fully functional, GILDEMEISTER - CTX 310 V3 Offer Details Stock number: 1039-9126 Machine type: CNC turning and milling center Manufacturer: GILDEMEISTER Model: CTX 310 V3 Year of manufacture: 2003 Control system: 840 D Siemens Storage location: D-59302 Oelde Country of origin: Italy Delivery time: by arrangement Basis of delivery: ex location Additional information: Blsdoxtpfgopfx Aacjp CNC Turning and Milling Center GILDEMEISTER - CTX 310 V3 - incl. bar loader IRCO Breuning - incl. 2x collet chucks - incl. 2x three-jaw chucks incl. various jaw sets - various VDI30 turning tool holders - various FZ tubes - approx. 20x 173E collets - collet sleeve for 185E collets (for bars up to Ø50) - 11x 185E collets WE OFFER YOU: - workshop-tested machines - free loading onto truck - NO auction fee - possible delivery (at extra charge) - unloading and commissioning (at extra charge) Technical Details Turning diameter: 210 mm Turning length: 580 mm Control: 840 D Siemens Centre height: 190 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 260 mm Main spindle: Speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 10 / 7.5 kW Max. torque: 115 / 86 Nm Spindle bore: 68.5 mm Usable bar diameter: 51 mm C-axis: 0.001° Travels: Travel - X: 185 mm Travel - Z: 455 mm Turret: Number of tool positions: 12 stations Tool mounting: VDI 30 Driven tool stations: 6 stations Tailstock: Tailstock travel: 400 mm Max. thrust: 4,000 N Feeds: Rapid traverse: X: 20 / Z: 30 m/min Feed force: 4.5 kN Total power requirement: 21 kW Machine weight approx.: 3.2 t Space required approx.: 8.0 x 2.2 x 2.0 m Accessories Documentation Chip conveyor Tailstock Coolant system Parts catcher C-axis Signal lamp Driven tool stations Bar loader: IRCO Breuning Turning tool holders: various Collet chucks: 2x Three-jaw chuck: ROTA NCW 185-46 Driven tools: 4x X / 2x Z

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Bljdpfx Aaour Hfzecsp

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 Bljdpfxexq Aqws Aacop - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 Bsdpfxow E Nkio Aacjlp -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: used, Year of construction: 1990, functionality: fully functional, Equipment: rotational speed infinitely variable, Lathe H.Ernault Somua Type Jupiter 830 Visu + steadies supplied Bedpfx Aasxr I A Uocelp

Condition: ready for operation (used), chuck outer diameter: 1,120 mm, total height: 4,100 mm, empty load weight: 16,500 kg, Type: Stanko 1512 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale verplaatsing: 775 mm maximale verticale verplaatsing: 700 mm Horizontale schuifmaat maximale horizontale verplaatsing: 630 mm maximale verticale verplaatsing: 1000 mm Dwarsbalk Blodpfxoxp Slbj Aacep maximale slag: 660 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long: 2750 mm Wide: 2975 mm

Condition: used, Year of construction: 1997, functionality: fully functional, GILDEMEISTER - CTX 500 Offer Details Stock number: 1039-9180 Type of machine: CNC lathe Manufacturer: GILDEMEISTER Model: CTX 500 Year of manufacture: 1997 Control: Eltropilot Heidenhain Location: D-59302 Oelde Country of origin: Germany Delivery time: immediately Freight basis: ex stock Additional information: CNC Lathe GILDEMEISTER - CTX 500 WE OFFER YOU: - Workshop-inspected machines - Free loading on truck - WITHOUT auction fee - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning length: 1,000 mm Swing diameter max. over bed cover: 600 mm Swing diameter over cross slide: 420 mm Control: Eltropilot Heidenhain Travel - X-axis: 275 mm Travel - Z-axis: 1,065 mm Main spindle: Blodpfx Aajxtpd Aecop Spindle speed range: 16 - 3,200 rpm Main spindle drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Turret: Number of tool stations: 12 positions Shank diameter: 40 mm Turret indexing time: 0.8 sec. Tailstock: Quill diameter: 100 mm Quill stroke: 120 mm Quill fitting: Morse Taper 5 (MT 5) Quill pressure: max. 950 daN Feeds: Rapid traverse X: 10 / Z: 15 m/min Feed force X: 500 / Z: 1,000 daN Total connected load: 52 kVA Machine weight approx.: 7.5 t Space requirements approx.: 5.5 x 2.5 x 2.1 m Accessories Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck SMW KNCS-N-260-72 Tool changer 12 positions

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Bjdoxr Rbtjpfx Aacelp Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm Bsdpfx Ajuw Izveacelp X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Condition: used, Year of construction: 2001, functionality: fully functional, GILDEMEISTER - NEF 320 Listing Details Stock number: 1039-9316 Machine Type: Cycle-Controlled Lathe Manufacturer: GILDEMEISTER Model: NEF 320 Year of Manufacture: 2001 CNC Control: Manual Plus 3110 Heidenhain Location: D-59302 Oelde, Germany Country of Origin: Germany Availability: Immediate Freight Terms: Ex works location Additional Information: Cycle-controlled lathe GILDEMEISTER - NEF 320 - Operating hours (power on): 21,529h WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: max. 320 mm Turning length: max. 740 mm CNC Control: Manual Plus 3110 Heidenhain Swing over bed: 320 mm Swing over cross slide: 150 mm Turning length: 740 mm Cross slide travel: 185 mm Bodpfjxtpcfjx Aacolp Distance between centers: 750 mm Main Spindle: Spindle speed range: 10 - 4,000 rpm Main spindle drive power: 11 kW Max. torque: 410 Nm Spindle nose: No. 6 DIN 55027 Front bearing spindle diameter: 85 mm Spindle bore: 50.8 mm Max. chuck diameter: 200 mm Chuck diameter: 200 mm Tool holder: Type: MultiFix - B Tailstock: Quill diameter: 70 mm Quill taper: MK 5 Quill stroke: 120 mm Feeds: Rapid traverse x/z: 8 / 10 m/min Feed force x/z: 3 / 6 kN Total power requirement: 14 kVA Machine weight approx.: 2.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Accessories Documentation Three-jaw chuck 200 mm Tailstock Tool holder MultiFix B

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA - MacTurn 50 Offer Details Stock number: 1039-9061 Machine type: CNC Turning and Milling Center Manufacturer: OKUMA Model: MacTurn 50 Year of manufacture: 2000 Control system: OSP 7000 L Location: D-59302 Oelde, Germany Country of origin: Japan Delivery time: By arrangement Freight basis: Ex site Additional Information: CNC Turning and Milling Center OKUMA - MacTurn 50 WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fee - Delivery available (at extra cost) - Offloading and commissioning (at extra cost) Technical Details Maximum turning diameter: 580 mm Turning length: 1,500 mm Control system: OSP 7000 L Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle: - Speed range, main spindle: 12 – 2,800 rpm - Spindle bearing diameter: 150 mm - Spindle bore: 110 mm - Spindle nose: JIS A2-11 - Main spindle drive power: 37 (30) kW - C-axis: 0.001° Travels: - X-axis: 598 mm - Y-axis: 230 mm (+110 / -120) - Z-axis: 1,660 mm Feeds: - Rapid traverse (X/Y): 12,000 mm/min - Rapid traverse (Z): 20,000 mm/min - Rapid traverse (C): 100 rpm - Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool Turret: - Type: H2 ATC - Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions - Driven stations: stepless - Speed range — driven tool positions: 40 – 3,000 rpm - Tool shank height: 25 mm - Boring bar diameter: 50 mm Tailstock: - Quill diameter: 120 mm - Quill stroke: 170 mm - Tailstock taper: MT 5 Bodpsxtn Umjfx Aacslp Tool Magazine: - Number of tool stations: 50 positions - Tool holder: MAS BT 50 - Max. tool diameter: 170 mm - Max. tool length: 350 mm - Max. tool weight: 20 kg - Magazine drive: 3.2 kW Total power requirement: 53 kVA Machine weight approx.: 18.5 t Space required approx.: 6.0 x 3.2 x 3.0 m Accessories - Chip conveyor - Central coolant system - High-pressure coolant: 20 bar - Tailstock - Signal lamp - C-axis: 0.001° - Y-axis - Hydraulic unit - Steady rest - Various tool holders: 44 positions - Three-jaw chuck: Schunk – ROTA NC 400-120 - Electronic handwheel

Condition: used, Year of construction: 2002, functionality: fully functional, MAZAK - SQT 250 MS Offer Details Stock No.: 1039-9042 Machine type: CNC Turning and Milling Center Manufacturer: MAZAK Model: SQT 250 MS Year of manufacture: 2002 Control: PC Fusion CNC 640 T Location: D-59302 Oelde (Germany) Country of origin: England Delivery: to be agreed Freight terms: ex works Additional Information: Bsdpfx Aajxtn H Ajcjlp CNC Turning and Milling Center MAZAK - Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery possible (at extra charge) - Unloading and commissioning (at extra charge) Technical Details Turning diameter (max.): 300 mm Turning length (max.): approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Swing diameter (max.): 525 mm Distance spindle nose – turret face: 115 – 690 mm Main spindle: Speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Max. torque: 351 Nm Spindle nose: A2-6'' Spindle bore: 76 mm Max. bar capacity: 64 mm Chuck diameter: max. 250 mm C-axis: 360° Turret: Number of tool stations: 12 positions Tool mounting: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Driven tools: Speed range – driven tool stations: 25 – 4,500 rpm Drive power – driven tool stations: 3.7 kW Max. torque: 35 Nm Sub spindle: Speed range – sub spindle: 35 – 4,000 rpm Drive power – sub spindle: 7.5 kW Max. torque: 57 Nm Chuck diameter: max. 150 mm Travel: X-axis: 190 (185 + 5) mm Z-axis: 575 (580 + 5) mm Sub spindle travel B: 585 (580 + 5) mm C-axis: 360° Feeds: Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 min⁻¹ Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement, approx.: 5.0 x 3.0 x 2.5 m Accessories Documentation Chip conveyor Coolant system Sub spindle C-axis (360°) Three-jaw chuck 250 / 150 mm 12-position turret Tool measuring arm Driven tool stations Extraction unit Fixed tool holders Driven tool holders