Condition: used, Year of construction: 2018, turning diameter 380 mm swing diameter 380 mm turning height 200 mm Control S 840 DSL x-travel 1700 mm z-travel 370 mm spindle turning speed - stepless 0- 6000 U/min main drive 26 kW feed in x - axis 0- 50 m/min feed range Z-direction 0- 35 m/min turret (x-stations) 8 Pos. Iodpfx Aex Hpy Toh Uobf total power requirement 36 kW weight of the machine ca. 14 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical ring turning center with ATC. Control: Siemens 840 DSL

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details turning diameter 170 mm turning length 330 mm control Fanuc System Oi-TD total power requirement 27 kVA weight of the machine ca. 6,0 t Additional information Precision CNC turning center with main and sub-spindle, driven tools and Y-axis Fanuc Oi-TD CNC control 6 controlled axes 4 simultaneously controlled axes Maximum workpiece (diameter x length): 170 x 330 mm Bar capacity: 65 mm Travels: X-axis: 211 mm Z-axis: 400 mm Y-axis: ± 50 mm A (counter spindle): 506 mm C-axis: 0.001 deg Rapid traverses: X-axis: 24 m/min Z-axis: 27 m/min Y-axis: 12 m/min A-axis: 27 m/min Main Spindle: Spindle diameter at front bearing: 100 mm Spindle head: A 2-6 Spindle motor: AC 7.5/11 kW (30 min./100% duty cycle) Speed range: 4500 rpm Sub-spindle: Spindle diameter at front bearing: 100 mm C-axis: 0.001 deg Speed range: 4500 rpm Iodpfx Ahex Hgnuo Uebf Drive power: 5.5/7.5 kW (30 min./100% duty cycle) Spindle flushing with integrated pneumatic ejector Turret: 12 stations Tool taper 25 x 25 mm Internal machining 40 mm diameter Max. speed: 5000 rpm Drive power 1.5/3.7 kW (30 min./100% duty cycle) Drilling/milling up to 13 mm diameter Tapping up to M8 Total connected load 27 kVA Dimensions: Machine length without chip conveyor 2690 mm Machine width without chip conveyor 1865 mm Machine height 1900 mm Net weight 6000 kg Equipment and accessories: Bar feeder Chip conveyor Various accessories such as collets and tool holders

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2050 mm Measurements depth 4261 mm Measurements height 2597 mm Machine weight 8000 kg Ibedpfx Ahox D Igqe Uef Main Drive Number of spindles 2 Spindle speed range 4500 rpm / 5000 rpm Number of axis 4 Movement X-Axis Movement 203.2 mm Z-Axis Movement 560 mm W-Axis Movement 640 mm Workpiece Workpiece drm over bed 508 mm Workpiece drm over support 508 mm Workpiece drm 336 mm Table Distance between 724.5 mm This 4-axis Hurco TMX 8MYS lathe was manufactured in 2013. It features a maximum turning diameter of 336mm and a swing over bed of 508mm. The distance between centers is 724.5mm, and it includes live tools with 12 positions in the turret. Ideal for precision machining, the Hurco TMX 8MYS machine we have for sale offers robust performance and versatility. Contact us for further details regarding this lathe. Application Types Turning

Condition: used, Tool turret TER Type:0.5.480.525 Iedpfx Ahjvi Hvls Uobf The article is used, comes from an industrial machine dismantling and was in operation until the dismantling. Please note that this is a sample image, which may have different traces of use and/or software. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for descriptive purposes only. Further information can be found on our homepage *

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Geminis Lathe Type: CNC5/PLUS/1000/4000 CNC control: Fagor Year: 1996 With 2 steadies + Tooling With 2 chucks Ijdpfxsxvr E Is Ah Uobf Can be inspected under power Video available

Condition: like new (used), – Centre distance 1000 mm Ibedpfox Iwplex Ah Uef – Swing diameter over bed 358 mm – Swing diameter over bed gap 502 mm – Swing diameter over cross slide 179 mm – Spindle bore 52 mm – 35–1900 rpm – Stepless speed adjustment – Digital speed display – Longitudinal and cross feed – Digital readout on two axes – Brake – Coolant system – Multifix with 4 turning tool holders – Machine lamp – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 2018, turning diameter 380 mm swing diameter 380 mm turning height 200 mm Control S 840 DSL x-travel 1700 mm z-travel 370 mm spindle turning speed - stepless 0- 6000 U/min main drive 26 kW feed in x - axis 0- 50 m/min feed range Z-direction 0- 35 m/min turret (x-stations) 8 Pos. total power requirement 36 kW weight of the machine ca. 14 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical turning and grinding center with ATC. Control: Siemens 840 DSL Iedpfx Ajx Hpy Heh Ujbf

Condition: new, Year of construction: 2025, 0583 mm Iedewp Tqnspfx Ah Ujbf 1710 mm 82 mm 436 mm 3000 U/min A1-8 DIN 55026 100 mm 235 mm

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Ibsdpfx Aoxcbkteh Uef Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, Year of construction: 2002, Technical details: turning diameter: 200 mm turning height: 120 mm weight of the machine ca.: 18 t Ibodpfxsr Dwpmo Ah Usf Available from 01.08.2024 *

Condition: good (used), Year of construction: 1991, For sale Mazak SQT 10 M Lathe Manufactured in 1991 Main Technical Specifications (Year 1991) Feature Specification Machine type Horizontal CNC lathe with live tooling and C axis CNC Control Mazatrol T32-3 Max turning diameter 230 mm (9 inches) Max machining length Approx. 300 mm to 305 mm (or 12 inches) Axis travels X axis: 160 mm; Z axis: 455 mm (or 17.93") Main spindle speeds 35 to 6,000 rpm Spindle motor power Typically 11 kW (approx. 15 HP) Turret capacity 12 positions (with live tooling capability) Live tools Speed from 120 to 3,000 rpm Ibedpfsx E R Amox Ah Uef Machine weight Approx. 3,600 kg to 3,850 kg BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, total length: 1,700 mm, total width: 800 mm, total height: 1,500 mm, Empty weight: 1.000 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 150 - Swing over bed [mm]: 305 - Distance between centres [mm]: 750 - Bed width [mm]: 250 - Spindle bore [mm]: 45 - Min. spindle speed [rpm]: 50 - Max. spindle speed [rpm]: 2400 - Options: Three-jaw chuck Iodpsx Dkh Rofx Ah Ujbf - Transport dimensions: 1700mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm Isdpfxex Hpyye Ah Usbf spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine has 8 position turret with 6 pos. live tooling. Machine has VDI 20. Machine is with tailstock !

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Ibsdpexiwnnefx Ah Uof Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Number of lower turrets: 1 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height mm: 1.885 Weight kg: 9.000

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm Ibodpsxcbkmsfx Ah Uof turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, Technical details: Ibodjx Hgkcepfx Ah Ujf number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 six-spindle automatic lathe 8 main spindles for bars up to D=20mm The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Ijdpfx Aswcxlwoh Ujbf Technical data and equipment available upon request

Condition: excellent (used), Year of construction: 2015, Control unit: OSP-P300L max. turning length: 1,250 mm max. turning diameter: 420 / 310 mm max. turning Ø over slide: 500 mm max. turning Ø over bed: 695 mm max. speed: 3,000 rpm Tool holder: BMT 60 2 tool turrets A turret: 12 tool positions (all driven) B turret: 10 tool positions (all driven) Tailstock Chip conveyor 3-jaw chuck Touchsetter Reinforced coolant pump 8 bar Preparation of hydraulic steady rest on lower turret Garwels machines and service The right choice We would be happy to provide you with a quote for our additional services - transportation - Installation of the machine - Commissioning - Instruction We are exactly the right contact for Ibedpfovd Ekwjx Ah Uof - repair - maintenance - service Please also visit our website www garwels de

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Ijdpfx Ahex Di Rqj Ujbf Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, center height: 165 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, total height: 1,300 mm, total length: 1,500 mm, total width: 800 mm, Harrison M300 3-phase 380V motor operates perfectly! Geared headstock with 12 spindle speeds. Spindle RPM adjustable from 40 up to 2500. Ibodsx Hkqgjpfx Ah Ujf Foot brake pedal. Norton gearbox for easy thread cutting. Thread cutting dial. Power feed in both longitudinal and cross directions. Metric lathe. Camlock D1-4 spindle with MT5 internal taper. MT3 tailstock quill. Splash guard. E-stop button. Coolant pump. Made in the UK! Distance between centers: 650mm Center height: 165mm Spindle bore: 40mm Overall dimensions: 150x80x130cm Contact us for shipping options! € 3,750.00

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Ijdpfx Ahexb Efro Ujbf Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 six-spindle automatic lathe 8 main spindles for bars up to D=20mm The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or Ibsdpsx Hggwefx Ah Usf *

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 (see attached documents for technical data) Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm Ibedpfoxcw Axsx Ah Usf - Tailstock center - Quick-change drill chuck MK5 - Documentation

Condition: used, Year of construction: 2000, turning length: 600 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 31 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 620 mm, total height: 1,960 mm, total length: 5,000 mm, total width: 2,650 mm, overall weight: 7,000 kg, Equipment: documentation/manual, CNC Lathe with driven tools CNC Control Siemens 840 D Turning diameter 400 mm Turning Length 600 mm Spindle bore diameter 65 mm Spindle speed 31 - 4.000 R/min Spindle motor 30-20.5 kW Movement X-axis 250 mm Movement Z-axis 620 mm Driven tool stations 12 Number of driven tools 12 Tool taper VDI 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Ibsdsx Ahxwepfx Ah Usf Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1998, turning length 4.500 mm Ibsdpfx Asx Emvieh Ujf greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT