Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,741 h, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tooling system: • Turret: VDI 16 disk turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feeds & axis performance: Bljdeympxnepfx Am Tok • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning spread (Ps): 3 µm • Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A)

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface Blsdoy Aaxropfx Am Tjk • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. Bsdpfx Amoyv Epvj Tjlk • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, workpiece diameter (max.): 220 mm, overall weight: 7,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, workpiece height (max.): 175 mm, product length (max.): 3,120 mm, number of axes: 2, This EMAG EMAG VL5 i DSL vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. - Max. Chuck Diameter: 250 mm- Max. Swing Diameter: 270 mm- Closed Standard Automation Capacity: 16 (80...220 mm) / 10 kg; 22 (30...160 mm) / 8 kg; 37 (30...85 mm) / 4.5 kg- Max. Permissible Total Automation Load: 175 kg- Chain Length: 224 Inches- Number of Chain Links: 224- Chain Pitch: 1 Inch (25.4 mm)- Loading Time: 2-4 s- Spindle Flange (DIN 55026): Size 6- Front Spindle Bearing Diameter: 110 mm- Main Drive AC Asynchronous Motor Power (100/40% ED): 18 / 27 kW- Main Drive Torque (100/40% ED): 200 / 300 Nm- Corner Speed: 850 rpm- Rapid Traverse Rate X: 60 m/min- Rapid Traverse Rate Z: 30 m/min- Feed Force X and Z: 10 kN- Ball Screw Diameter X / Z: 40 mm- Tool Carrier: 12-position turret, Cylindrical Shank Receptacle DIN 69880 (VDI 40)- Tool Shank Diameter: 40 mm- Max. Tool Length incl. Holder: 190 mm- Max. Tool Interference Circle: 760 mm- Driven Tools Max. Speed: 6000 rpm- Driven Tools Corner Speed: 3000 rpm- Driven Tools Max. Power: 8.5 kW- Driven Tools Max. Torque (10/40/100% ED): 40 / 24 / 15 Nm- Current Supply / Current Type: 3 ~- Frequency: 50 Hz- Operating Voltage: 400 V- Control Voltage General (DC): 24 V- Control Voltage Valve / AC: 24 V (DC) / 230 V (AC)- Light Connection: 24 V- Connection Power: 36 kW- Rated Current: 64 A- Supply Fuse: 80 A- Electrical Execution Standard: VDE 0113- Length incl. Chip Conveyor: 4185 mm Additional equipment, not included • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% Bljdpfszg H Dyox Am Tok • Sound pressure level: 78db(a) Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes Driven Tools Yes Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 1998, operating hours: 35,626 h, spindle speed (max.): 3,000 rpm, number of axes: 2, Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details. Center distance: 950 mmCenter height: 200 mmSwing over bed: 410 mmSwing over cross slide: 200 mmCross slide travel: 230 mmCarriage guide length: 480 mmSpindle nose: DIN 55025 size 6Spindle bore: 54 mmSpindle taper: Morse taper 6Drive power (100% / 60% duty): 7.5 / 9 kWMaximum torque at spindle: 700 NmSpeed range: 1–3000 rpmSpeed range gear stage I: 1–750 rpmSpeed range gear stage II: 4–3000 rpmTailstock quill diameter: 65 mmTailstock quill travel: 120 mmTailstock taper: Morse taper 4Tool system: Parat size 2Control: D2Number of axes: 2 (X, Z) Technical Specification Bodpfjy Axu Sjx Am Tolk Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment Blodpfx Amjx D Iuzo Tjk • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. Bsdpfx Amoyffgrs Tjlk • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: used, Year of construction: 1970, centre height 120 mm spindle bore 20 mm Blsdozndt Ijpfx Am Tek copying device ja kW weight of the machine ca. 3 t

Condition: excellent (used), Year of construction: 2004, operating hours: 27,000 h, turning length: 1,070 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,070 mm, workpiece weight (max.): 150 kg, total height: 2,800 mm, total length: 9,000 mm, total width: 5,000 mm, Forkardt chuck, main spindle 250 mm Forkardt chuck, sub spindle 250 mm Chip conveyor Filtration with coolant filtration and paper filtration New main spindle bearing installed in 2022, service life 12,000 hours Machine in excellent condition and fully operational Complete set of manuals and documentation Max. turning diameter: 560 mm X-axis: 485 mm Y-axis: 160 mm Z-axis: 1070 mm B-axis: 240° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 37 kW Sub spindle speed: 5000 rpm Sub spindle bore: 65 mm Sub spindle power: 37 kW Tool changer: 80 Bljdpjzl Agzsfx Am Tok Spindle speed for driven tools: 12000 rpm B-axis interface: HSK63 B-axis spindle speed: 12000 rpm B-axis power: 22 kW Chip conveyor: Yes Tool Eye: Yes Operating hours: 27000 hours Workpiece weight: 150 kg Length: 9000 mm Width: 5000 mm Height: 2800 mm Weight: 14500 kg

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 284 mm turning dia. over face-slide: 380 mm turning length: 381 mm x-axis: 153 mm longitudinal traverse (z-axis): 406 mm control: Siemens 810D revolution per minute: 5000 U/min spindle bore: 52 mm tool turret - number of stations: 12 Stationen / Stations operating hours - idle run: 78000 h electrics - voltage/frequency: 400/50 V/Hz Bodpfozrlvlex Am Tslk total power requirement: 11 kVA Weight approx.: 2,8 t dimension machine approx.LxWxH: 3,0 x 1,6 x 1,8 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Bsdpfx Ajzakk Eem Telk Tailstock Coolant tank and tray 6 tool holders

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Coolant pump and tank Swarf conveyor Bledozakgtspfx Am Tjk

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Bodpfx Aszaix Iom Telk Coolant pump and tank Swarf conveyor

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm Blsdpfx Aozl E T Dom Tsk turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: used, weight / kg taper MK / Blodpfx Amjzmy Swe Tek

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 332 mm, travel distance Z-axis: 625 mm, number of axes: 4, This 4-axis EMAG VTC 100 vertical turning machine was manufactured in 2014. It features dual-turret machining with 2 tool stations, live tooling, and an enclosed working area. The machine is designed for high-volume production and is suitable for shaft machining. If you are looking to get high-quality turning capabilities, consider the EMAG VTC 100 machine we have for sale. Contact us for further details. • 4x units • CNC Control: Siemens SINUMERIK • Turrets: 2 • Live Tooling: Yes • Enclosed Working Area • Hydraulic Chuck Blsdpfx Aezhbiaem Tsk • Automatic Workpiece Handling • Dual-Turret Machining • Suitable for Shaft Machining • Suitable for High-Volume ProductionThe technical specifications may vary slightly as these are custom made machines Technical Specification Driven Tools Yes

Condition: new, functionality: fully functional, spindle bore: 26 mm, turning diameter: 250 mm, turning diameter over top slide: 145 mm, center height: 125 mm, turning length: 750 mm, total length: 1,520 mm, total width: 670 mm, total height: 1,650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, bed width: 135 mm, type of input current: DC, overall weight: 195 kg, three-jaw chuck diameter: 125 mm, spindle mount: MK 4, Turning and milling combination WMP250BVx750 with brushless motors including a luxury base cabinet LATHE Center distance ----- 750 mm Center height ----- 125 mm Diameter over bed ----- 250 mm Headstock bore ----- 26 mm Headstock spindle mount ----- MK4 Lathe speed ----- 50-2000 continuously variable rpm Motor power ----- 1.1 kW Weight ----- 135 KG Blodsga T Emspfx Am Tek MILLING UNIT Overhang of milling attachment ----- 170 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling machine spindle mount ----- MK2 Milling head rotatable ----- +/- 90 degrees Travel of milling spindle quill ----- 50 mm Motor power ----- 600W Weight ----- 75 KG

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM Bljdex D Nd Djpfx Am Tok

Condition: ready for operation (used), Year of construction: 2015, operating hours: 48,086 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information. • IMS 76 main spindle • Counter spindle • 2 x 16-station Sauter star turret VID 30 • Siemens 840D control • Eccentric turning and milling capability • TC alternating speed • Glass scales on X1, X2, X3, Y1, Z1, Z2, Z3 • Counter spindle slide with cross stroke, C3, tailstock Additional equipment • 980 L coolant system with 8 bar/20 L and 20 bar/40 L high-pressure, M-function programmable • Paper band filter • Chuck rinsing device for main (outside) • Chuck rinsing device for counter (outside) • Coolant spray gun • Hinge-type chip conveyor • Bar machine package (bar feeder) • Window cleaning with compressed air Blsdpfx Aex D Ndwem Tek • SK package for aluminum machining • Tool breakage monitoring Artis CTM

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT20SY0117, total height: 2,500 mm, total length: 4,100 mm, total width: 2,240 mm, overall weight: 12,000 kg, Control: Fanuc 18i - TB Swing over cross slide: Ø800 mm Max. cutting diameter: Ø620 mm Max. turning length: 740 mm Main spindle: speeds 50-5,000 rpm Bljdpfozq A Dkex Am Tjk Spindle bore/Spindle nose: Ø76.2 / Ø68 Number of turrets: 12 B-axis: Ø810 mm Rotary tools: speed 50 – 4,000 rpm Rotary tool motor (turret one/turret two): 7.5/5 HP Rapid traverse (X/Z/Y): 790 / 20 m/min Sub spindle rapid traverse: 20 m/min Dimensions: Floor space: L = 4100 x W = 2240 x H = 2500 Machine weight: 12000 kg.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Blodpex Ryrhofx Am Tsk Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Machine weight: 4,750 kg.

Condition: good (used), Colchester Master 2500 In good condition. Bsdpozp U Apjfx Am Tslk Includes some accessories. Transport can be arranged.

Condition: excellent (used), Year of construction: 1959, Schaublin 102 VM In very good condition. Includes accessories as shown in the pictures. Transportation can be arranged. Bsdozp Uz Sspfx Am Tjlk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 used CNC turning machine DMG Gildemeister NEF 600 - Year of manufacture: 2010 Operating hours: approx. 40,600 h - Spindle hours: approx. 17,900 h Refurbished by DMG Mori in 2025: Electronic control unit Control system: Siemens Sinumerik 840D (ERGOline) Max. turning diameter: 600 mm Swinging diameter over slide: 490 mm Turning length: 1,190 mm | Distance between centers: 1,335 mm Bar capacity: 75 mm | Spindle bore: 90 mm Travel X / Z: 398 / 1,250 mm Spindle nose A8 DIN 55026 | Chuck 250 / 315 mm Max. speed: 3,000 rpm Power (100 % / 40 % duty cycle): 27.5 / 39.4 kW Torque S1 / S6: 600 / 845 Nm Blsdpfx Amozfafze Tok Tool turret, 12 stations, VDI mounting (static and driven) Tailstock, hydraulic, travel 1,150 mm, max. 1,250 daN, MK 5 Connection: 400 V / 50 Hz / 42 kVA Includes: Chip conveyor Hydraulic 3-jaw power chuck SCHUNK Extensive tool package: numerous VDI holders, static and driven (including boring bar holders, drilling and collet chuck holders), mostly brand Holex, without cabinet Technical documentation (German) Footprint: L x W x H: 3,697 x 2,687 x 1,936 mm | Total weight approx. 7,000 kg Technical data subject to change, prior sale reserved. Used machines and accessories are always sold without warranty!

Condition: excellent (used), spindle bore: 36 mm, total length: 1,600 mm, total width: 700 mm, total height: 1,400 mm, spindle speed (max.): 3,550 rpm, Weiler Matador VS1 in very good condition. Bsdpfxozp Uzlo Am Tslk Includes accessories as shown in the pictures. Transportation can be arranged.